Guide to Atmospherics

Этот раздел или статья в стадии разработки. Информация на этой странице может оказаться неполной или не соответствовать реальности. В данный момент ей занимается Player1208.

Руководство атмосферника

Статья из каталога руководств Категории: Инженерам;

Добро пожаловать в Атмосферную. Вы живете и работаете в стране труб "Атмосия". Если вы Atmospheric Technician, то вы долгое время проведете в "Атмосии". Весь воздух на станции уходит от сюда,и кто-то с разрешением атмосферника и изобретательностью может управлять всей станцией.

Эта страница расскажет вам как спасти всю станцию от пожара, разгерметезации и прочей опасной фигни.

Атмосия

Это страна труб,мирное место с автоматикой что бы гражданам Атмосии было легко работать.Может показаться что в Атмосии всегда царит бардак из-за труб и что они выполнят за вас всю работу.И вы можете прохлаждаться в баре.Но это далеко не так.

Каждый гражданин Атмосии должен знать несколько вещей:

• Atmospheric alert computer с помощью этой консоли вы можете посмотреть где находится разгерметизация,пожар и утечка газов.
• The Distribution Computers консоль показывает состояние воздуха всей станции.
• Fire-fighting equipment костюм предназначеный для пожаротушения.Вы можете одеть типичный костюм предназначеный для сильного холода,но он слабее.
• Portable air pump выкачивает\закачивает из\в себя воздух.
• Portable air scrubbers выкачивает токсины из воздуха
• Portable space heaters собствено портативный обогреватель
• Pipe dispensers создает трубы разных видов.
• Fuel and water tanks для борьбы против пожаров или наоборот
• Central atmospheric computer благодаря этой чудо технике вы можете управлять всеми консолями управления атмосферной комнаты.

Трубы

Атмосферные трубы это довольно просто,но расположение труб заставляет думать что это сложно.Есть четыре вида труб,они разного цвета:

• The dark blue loop is the distribution loop. через эти трубы воздух распространяется по всей станции.
• The cyan air mix loop, which contains mixed air содержит в себе воздух из нитрогена и оксигена.Дальше по трубе поступает в синий.
• The red/green loop, which retrieves (red) and filters (green) waste air from the rest of the station
• The yellow loop, internal to Atmospherics, which is used for custom air mixes

The air breathed by humans on Baystation 12 is made out of oxygen and nitrogen, and is mixed on the south end of Atmosia. The gasses are pumped through the cyan tubes from their respective canisters (N2, O2) and are mixed in the air canister (Air). The breathable gas is then pumped through the cyan loop to the north of Atmosia, where it is then pumped into the blue loop and out to the station.

The filtering loop basically runs the gasses through the filters along the green piping and injects all gas not filtered into the mixing canister.

The "canisters" of the station's Atmospherics network are actually rooms filled with the appropriate gas. The output of these rooms are controlled by their respective Supply Control Computers, a small valve that allows the gas to be injected into the pipes, and a filter pump that moves the gas through the pipes.

To create a custom mix of gas, turn on the output of the supply control computers, open the manual valves, and turn the output of the pump to what you wish it to be. The gas will travel through the orange pipes into the mixing chamber. The air mix is pumped into the mixing chamber via a pump north of the orange loop. The mix obtained can then be pumped into the distribution and filtering loop. Remember to open the hand valve south of dark blue t-shaped valves and turn on the pumps or your custom mix will just be redistributed through the red loop.

Setting Up Atmosia

Properly initialized, Atmosia can keep the station aired-up through nearly any emergency. Improperly initialized, it's a waste of space at best and an outright fire hazard at worst.

Here's how to do it the right way.

Файл:AtmosGuide.png

• 1) Go to every green-circled pump and filter. Make sure they're all on and set to max pressure (4500 kPa), so gas will actually be moved.
• 2) Go to every gray-circled valve and click on it with an open hand to turn it on. You can tell if it's on by looking at the small light on its side; if it's green, it's on.
• 3) Go to every computer at the edge of the room and click "Search", so that the computer will actually register that it has gas to inject into the system.
• 4) Go to the temperature regulator and turn it on.
• 5) Go outside, in the direction indicated by the cyan arrow, and use a wrench to connect the three portable air pumps to the gas ports so that they'll fill.

The arrows indicate the direction of flow of various pipe systems. The dark blue arrow indicates the distribution loop carrying gas out to the rest of the station. The red arrow shows the waste intake. The light blue arrow shows both the direction of mixed air flow and points towards the portable air pumps that are outside Atmospherics.

Once that's done, you can go around and configure the various air alarms on the station to filter out toxins, NO2, and CO2. They default to filtering only CO2, but the other two are just as dangerous. You can get the AI to help you with this, though, so it's not that difficult.

Done correctly, Atmosia should be pumping good air just faster than it's lost, and draining bad air away away as fast as the traitors can set it on fire. You can go kick back in the bar like a boss, and wait for the inevitable minor station damage and cries of "Call the shuttle!" on the radio from folks who don't even know it ain't a big deal.

Congratulations. You are now more competent than 90% of all Atmospheric Technicians.

HOW TO BE A TRAITOROUS BASTARD

Or: How to get the AI killed; How to call the shuttle as Atmos Tech.

• 1) Open valves connected to harmful gas you want to add to the station.
• 2) Set pumps to the distribution loop to maximum pressure output (4500kPa)
• 3) Set filters to not filter harmful gasses you want to add to the station
• 4) Open valve from custom mix chamber
• 5) Turn on pump leading to distribution loop
• 6) Wait for vents to slowly kick out your deathgas mix as regular atmos drains out through the inevitable hull breaches. (Alternatively turn off pressure checks on atmos alarms vents)
• 7) If you need to kill someone for your objective, and you want to be more proactive, the Fire Axe mounted in the wall is surprisingly effective. Just don't leave it lying around, because it's the only one in the station.

To hurry this process up, you can set the air vents at local control panels to maximum output pressure. Not doing so gives the AI and atmos techs more time to notice what you've done and shut it off before it takes effect.

A faster process for achieving the same result is to do the following:

• 1) Disconnect, change the direction of, and reconnect the pump that feeds from the air mix to the mix tank in the north-eastern room of atmosia.
• 2) Open the valves for your deathgas mixture of choice.
• 3) Power on and max the pressure on every pump in the mix pipes (yellow pipes) from the storage tanks out to the station output (blue pipes).

This simply means that instead of the air mix being put into the mix tank as it normally does, the air mix (which may or may not contain death gasses) is fed into the station output.

Crafty atmos traitors will want to cut cameras, replace pumps with pipes, and use tricky pipe configurations to avoid the AI interfering or the detective trying to fix it.