Hacking

Что вам понадобится

• Изолированные перчатки - Иногда может долбануть током, так что мало не покажется. Так что лучше использовать перчатки.
• Файл:Screwdriver tool.png Отвертка - Для открытия панелей и им подобным. Чертовски необходимый инструмент.
• Файл:Wirecutters.png Кусачки - Для обрезания проводов. Также необходимая штука.
• Мультитул - Для подачи тока на провода; Не так необходима для большинства хака, но делает жизнь намного проще.
• Монтировка - Для открытия обесточенных дверей.

Файл:Airlock.png Airlocks

Both internal and external access airlocks are hackable, despite the fact that external ones look a lot like Файл:Firelock.png firelocks, which are not hackable. Wires are randomized at the start of each round, but are standardized throughout the station (e.g., every orange wire might toggle the bolts). This is probably where you'll be doing the most of your hacking. Remember, cutting power to the door will stop everything else from working. Also, keep in mind that if you are the Chief Engineer, you can find what wires do what by clicking on the Notes verb in the OOC panel. This is extremely useful, and sometimes other engineers (and non-engineers) will ask you which wire bolts/unbolts or opens a door. It's generally considered good if you tell them, assuming they are authorized.

Finding the Right Wires (With a Multitool)

Remember, wires are randomized, so you need to identify them the first time. The most important ones to identify are the "test light" wire and the "door bolts" wire.

1. Remember to equip insulated gloves to prevent electric shock.
2. Файл:Screwdriver tool.png Screwdriver in hand, click on the airlock to open the panel and expose the wiring
3. With a multitool, click on the airlock to access the wiring.
4. Click each "Pulse" link to pulse the wires, and keep an eye on "The door bolts" and "The test light" at the bottom of the menu (two wires will cause this - pick either one). When you see either the "The test light is off!" or "The door bolts have fallen!", remember the colors of both wires.
5. To put the door back to normal, the test light will need to be on first. It will come back on by itself after 10 seconds. Then, re-pulse the door bolts wire to put them "up" again, and close the wiring panel with your screwdriver.

Airlock Hack (With a Multitool)

If you have a multitool, getting through doors gets a lot easier and faster.

1. Have the multiool in one hand and a crowbar in another for quick switching. You'll only have 10 seconds (but you can retry if you fail).
2. Pulse the Test light wire, then quickly switch to your crowbar and click on the door to pry it open while the power is off.
   • Note: The door will stay open. If you want to close it, click on it with the crowbar again, then use the screwdriver to close the wiring panel.

Finding the Right Wires (Without a Multitool)

Make sure you choose a door that you and everyone else won't mind you breaking, because in most cases this will prevent the door from opening again until it's repaired by an Engineer.

1. Remember to equip insulated gloves to prevent electric shock.
2. Файл:Screwdriver tool.png Screwdriver in hand, click on the airlock to open the panel and expose the wiring
3. Equip Файл:Wirecutters.png wirecutters.
4. Click on the door to open the menu, then slowly Cut each wire until you see "The door bolts have fallen!" at the bottom of the menu. Remember the color of the wire you cut that caused the bolts to drop.
   • Note: if you're lucky enough to be on the last wire and you haven't seen the bolts drop yet, you know that wire is the winner, so you don't need to cut it. Just remember its color.
5. Mend all the wires and leave that door alone.
6. Now that you know the wining wire color, move on to the next door (or if you were lucky and found the bolt wire without cutting it, you can continue with the same door and skip to step #3 in Airlock Hack (Without a Multitool))

Airlock Hack (Without a Multitool)

1. Open the wiring panel with the Файл:Screwdriver tool.png screwdriver.
2. Using the Файл:Wirecutters.png wirecutters, cut all wires EXCEPT for the door bolts wire that you found earlier.
3. Use a crowbar on the door to pry it open.

Wire Functions

1. • ID wire: Pulsing will flash the 'access denied' red light; cutting will prevent anyone from opening the door if it's a restricted door; otherwise, it does nothing.
   • AI control wire: Pulsing will flash the 'AI control light' off and on quickly; cutting will prevent the AI from accessing the door unless s/he hacks the power wires
   • Main power wires (Test light wires): Pulsing will turn off the 'test light' and kill the power for 1 minute; cutting will kill the power for 10 seconds before backup power kicks in. There are two of these, and both are needed for the main power to work. Cutting will cause sparks.
   • Backup power wire: Pulsing will turn off the 'test light' kill the power for 1 minute if the main power is out, otherwise, nothing. Cutting will obviously disable the backup power. There are two of these, and both are needed for backup power to work. Cutting will cause sparks.
   • Bolt control wire: Pulsing will toggle the bolts; cutting will drop the bolts.
   • Door control wire: If the door is ID restricted, this is pretty much useless. If not, Pulsing will open/close the door and cutting will keep it that way, sort of like bolting.
   • Electrifying wire: Pulsing will electrify the door for 30 seconds; cutting will permanently electrify it until mended. This will cause the safety light to flash. You can find the wire easily because the door shoots sparks when pulsed or cut. Obviously useless if there is no power to the door.
   • Hydraulics wire: Pulsing will cause the hydraulics control light to flash red, causing anyone inside the airlock to be crushed when it closes. This causes around 40 brute damage if you let it close normally, or around 60-70 if you force it closed (clicking on the door). Both can cause broken bones that have to be fixed with Surgery. Cutting does absolutely nothing.

Strategies

• Create an obstacle by dropping the bolts, cutting all the wires, and then welding the door shut. This is especially effective if you happen to have the only pair of insulated gloves on the station.
• Remotely pulse an airlock by attaching a signaler, which when signaled pulses the wire it's attached to. This allows you to remotely bolt and unbolt a door, for instance. Be sure to turn off the speaker so no one can hear it being toggled.
• Hacking without gloves. First find two wires of importance. The bolts wire, and the test light wire. Pulse a random door to find out the wires. If you hear sparks, see your health going down or see the message "You feel a powerful shock coursing through your body!", close that hacking window and move onto another door. Once you got the main power wire, head to an unbolted door, pulse the wire, crowbar it open. You get a larger window of time to crowbar, and you can do it without gloves.

Secure Airlocks

These airlocks are in secure locations (EVA, AI upload, etc.) and are much harder to hack. They have a few more wires than normal airlocks and have extra security functions. These include AI alert wires, wires that only drop bolts, and different wiring from standard airlocks. You also have to open the panel to be able to emag them as a traitor.

To access the wiring panel, use the following tools in this order:

• Файл:Wrench.png Wrench to remove the bolts.
• Файл:Welder.png Welder to remove the armour.
• Файл:Wrench.png Wrench again to remove plating.
• Файл:Screwdriver tool.png Screwdriver to open wiring panel normally.

To continue hacking a Secure Airlock after opening the wiring panel, follow the same steps in either with a multitool or without one, since the wires for secure airlocks are not going to follow the same color scheme as normal airlocks.

Файл:APC.pngAPCs

Used to control power to a certain room. All APC breakers can be accessed via Power Monitoring Computers regardless of the lock status, and can be remotely controlled from there.

1. Файл:Screwdriver tool.png Screwdriver in hand, click on APC to open the panel and expose the wiring.
2. Equip a multitool.
3. Put Файл:Wirecutters.png wirecutters in your other hand to quickly Cut and Mend a wire if you short out the power accidentally (which will likely happen).
   • Power wires (2): Pulse will short out the APC. You must cut and mend the wire to restore power. Not repairing the short will render the main breaker moot, even if accessed remotely.
   • AI control wire: Like the airlock, pulsing will flash the light off and on quickly; cutting will disable AI control
   • APC lock wire: This is the wining wire you want to pulse in order to unlock it.
4. Use a screwdriver to close the wiring panel back up.

Файл:Airalarm.pngAtmos Alarms

Used to monitor environmental factors in a room, such as temperature, pressure, toxins, etc.

1. Файл:Screwdriver tool.png Screwdriver in hand, click on Air Alarms to open the panel and expose the wiring.
2. Equip a multitool andФайл:Wirecutters.png wirecutters.
   • Id Scan: Pulsing will unlock the alarm for 30 seconds. Cutting will not allow people to access the alarm even if they have the correct ID. Mending will allow normal operation.
   • Alarm: Cutting will cause an atmos alert in the area, and most likely alert the AI as well. Pulsing will reset the alarm status. Mending allows the alarm to work again.
   • Panic Syphon: Cutting or Pulsing this wire will activate the panic syphon. Mending does nothing, and it must be turned off from the actual alarm.
   • AI Control: Cutting this wire will prevent the AI from using the alarm. Pulsing it flashes the light on and off quickly. Mending allows AI control.
   • Power: Cutting this wire will deactivate the alarm. Pulsing it turns it off for 30 seconds. Mending restored power.
3. Use a screwdriver to close the wiring panel back up.

Autolathes

1. Файл:Screwdriver tool.png Screwdriver the autolathe to open the maintenance panel.
2. Click on the autolathe with an empty hand to access the wiring.
3. There are three important wires. Cutting them toggles their light permanently, pulsing does so temporarily. Red light is power, green light is electrocution and blue is hacked options.
4. Have fun accessing some new options
   • Compressed matter cartridges (for the RCD)
   • Handcuffs
   • Infrared beam (security)
   • Infrared sensor
   • Bullets
   • Other stuff

MULEs

1. Unlock the controls with a Quartermaster's ID.
2. Unscrew the maintenance panel with the screwdriver.
3. Pulse various wires with a multitool. Pay attention to the reaction the MULE gives. Also note that these wires are randomized for each MULE
   1. Cutting the wire that causes the loading bay to thunk will remove cargo restrictions.
   2. Cutting the wire that leads to the safety light will awaken its thirst for blood and cause it to run over people in its path. DO NOT DO THIS UNLESS YOU HAVE A VERY GOOD REASON.
   3. Cutting one of the wires that makes the motor whine will safely speed up the MULE. Cutting both will immobilize it.
4. Screw the panel back on.

Minor Hackables

I haven't a clue why you'd ever want to hack any of these things, but you can!

Cameras | Fire alarms

Use Файл:Wirecutters.png wirecutters to enable/disable.

• Disabled fire alarms will not automatically trigger firelocks
• Disabled cameras will stop moving and show a red light, preventing anyone from viewing the room through a console (including the AI).

Файл:Station Bounced Radio.png Radio/Signaler

1. Screwdriver in hand, click on the offending radio so it can be modified or attached
2. The usual radio use panel will pop up, but now with access to the wiring. If you've closed it by accident, just click on the radio as if you were going to change the settings on it.
3. There are three wires. Two have apparent uses; the third is pretty much useless.
   • Output wire will disengage the speakers (or signal-receiving on a signaler)
   • Input wire will permanently disengage the microphone (or signal-sending on a signaler)

Interestingly, tracking beacons and station intercoms also count as radios.

Secure Briefcase

1. Screwdriver in hand, click on the (briefcase/safe) to open the panel and expose the wiring
2. Multi-tool-spam the (briefcase/safe) until you get a confirmation that the memory is reset.
3. The memory is now reset. Punch in your favorite code and hit E to set it.
4. Screwdriver the panel shut.

Vending machines

The only thing worth hacking!

Four wires

1. Firing wire when cut fires stuff at people. When pulsed will do so. Controlled by the blinking light.
2. Contraband wire does nothing when cut, when pulsed unlocks illegal or rare goods. Wire is unknown.
3. Access wire when cut it turns on a orange light, allowing for ID restricted machines(med machines, sec machines, possibly botany machines) to be used by anyone.
4. Shock wire Like the firing wire in effects from hacking, except it shocks instead of shoots.